How to root Tecno A+(f7), A2(f8) , s3, m3, p5, l3, d3, d5, n7, n9, m7, q1, s5, b3, s7

       

I'll be explaining how to root the above listed devices with without a PC.
Compatible Devices
# How to root Tecno Q1 , Tecno N7, Tecno D5, Tecno P5 ,Tecno S3, Tecno S5, Tecno M7 and Tecno M3
Procedure
1. Download Framaroot to your
device
2. Launch and Install Framaroot
3. Click on Install Supersu
4. Click on Boromir
5. You are rooted

## How to root tecno L3
To root your Tecno L3, you'll need:
1. A Computer and USB debugging enabled on your L3
2. A USB cable to connect the Tecno L3 to the
computer
3. Download SHUAME @ http://203.205.136.144/dl.shuame.com/fil...c13&p=.exe
4. Install Root Checker on your phone to know if you
are have been granted Root access

Follow these steps carefully.
- After the download of shuame on your PC, install it
- Connect your TECNO L3 and Launch SHUAME
allow the shuame load the phone name and build
etc.

[img width=300x400]https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhN1aV9Rb65CC4Kjjxl2S_9MGdQq5_pD2n5JQNBXXg8kqcxtsHSofqzHsbZNlKdBzFU43Xgl25kAbEt8YGPvdVCXSjRbbrs-KLheD_yizz1qasv6n7uMM63y3QKySUjSnstU5Hd20da22v7/s1600/shuame.png[/img]

now click on what is circled in the picture below



Note: if you see the red alert on the -~# Root it
simply means you have not been rooted and also
that you can root the phone using the software. but
if not either you have been rooted or you cant root
your device with the software.
After few minutes you should get this screen



After rooting you should have



Congrats, your L3 is rooted

# To root tecno phantom A, A+ , A2, N9, B3 and D3
What you will need
1.A laptop or desktop computer
2. Download and Install PdaNet+
3. Download Eroot
4.The USB cable of your phone.
Steps to root your Tecno Phantom A, A+ , A2, B3, S7 and D3
DOWNLOAD THE PDA.NET AND EROOT ABOVE
THEN FOLLOW THIS STEPS...
1. Connect your phone to your PC
2.Enable USB debugging on your Android phone in
Settings > Applications > Development. ( if u cant
find usb debugging mode on ur phone goto
settings>about phone > then keep on tapping build
number like 8 times b4 u can c d option.
3. Install the PDA.net you downloaded earlier on
your PC.
4. During the installation you'll be prompted to
select your cell phone manufacturer
and also connect your device via USB.
5. Click on Ok and allow to install
6. Extract and run the ERoot downloaded. Ignore
the Chinese Language displayed.
7. A root button would appear. If it doesn't, close
the pda.net running from your system tray.
8. Click on the root button and your phone would be
rooted in 10 seconds.
9. Disconnect your phone from your pc or
laptop.Goto your menu and you will find superuser
installed.
10. Reboot your Tecno Phantom A
+ or F7,Congratulations your phone is now rooted